Advertisement
LOG IN
WebUI
Using a computer connected to the same subnet, open your browser and type in
device to access the WebUI.
To log in the first time, use the username root and password default.
NOTE: During your first log in, you will be directed to change the root password.
Command Line Interface (CLI)
The unit can also be accessed through an SSH client using the device IP address over port 22.
Change Root Password
Click CONFIGURE > User Management > Local Users.
Click the Edit User button next to the root user. On the User Details page, enter and confirm the new
password. Scroll to the bottom of the page and click Save User.
https://IPaddress
of the
2020-May
Advertisement
