Assembly Of The Meat Grinder; Assembly Of The Sausage Attachment; Mounting Of The "Kebbe" Attachment; Assembly Of The Cookie Attachment - Profi Cook PC-FW 1060 Instruction Manual

Assembly of the meat grinder

• Please also observe our illustrations under "A"
(Page 4).
• Please follow points 1 to 4 as described under
"Preparation".
5. Insert the knife with the sharpened edge out-
wards onto the shaft of the scroll.
6. Select a steel disc (9).

NOTE:
The guides are located in the recesses on the
spiral housing.
7. Rotate the catch clockwise.
See below "Electrical connection/Operation".

Assembly of the sausage attachment

• Please also observe our illustrations under "B"
(Page 4).
• First proceed as described under "Preparation"
and "Assembly of the Meat Grinder", points 1
to 6.
7. Position the sausage attachment on the spiral
housing.
8. Rotate the catch clockwise.
See below "Electrical connection/Operation".

Mounting of the "Kebbe" attachment


NOTE:
Tubes of meat or dough paste can be made with
the "Kebbe" attachment.
• Please also observe our illustrations under "C"
(Page 4).
• Please follow points 1 to 4 as described under
"Preparation".
5. Position the 2-piece Kebbe attachment on the
shaft of the spiral.

NOTE:
The guides on attachment are located in the
recesses on the spiral housing.
6. Rotate the catch clockwise.
See below "Electrical connection/Operation".

Assembly of the cookie attachment


NOTE:
You can shape different forms with this attach-
ment after preparing a cookie dough. This is
particularly suitable for so-called "Spritzgebäck"
(cookies).
• Please also observe our illustrations under "D"
(Page 4).
• Please follow points 1 to 4 as described under
"Preparation".
5. Insert the 2-part cookie attachment (13).
6. Rotate the catch clockwise.
7. Slide the rail (14) through the slots on the cookie
attachment.
See below "Electrical connection/Operation".

Electrical connection

• Ensure that the function switch is set to " "
(Off).
• Connect the appliance to a correctly installed
and earthed socket.

Switch functions

The appliance is equipped with a forward and
return function. If the scroll should block, you can
use the return function, in order to release it.
- Forward:
• Turn the switch (3) to " ". The appliance is
in the "Forward" mode.
- Return:
• Turn the switch (3) to " " and wait until the
motor stops.
• Press "R" on the switch (3). The appliance
will be in the "Return" mode as long as you
keep the switch pressed down.
45