Netware Server Installations; User Guide Corrections; Ndis 2.01 Driver Installation Instructions; Wake-Up On Lan Capability - 3Com TokenLink 3C359 Release Note

2 T L V
OKEN INK ELOCITY
2 Add a second PCI device to your system.
3 Disable power management.
3Com recommends that you use the NetBEUI or TCP/IP
protocol stacks when installing the 3C359 NIC in a
Windows 95 client attaching to a Windows NT server.

NetWare Server Installations

When installing the 3C359 NIC in a NetWare 4.x server,
copy the NBI.NLM file from the NETWARE\NWSERVER\4.1X
directory on TokenDisk
When installing the 3C359 NIC in a NetWare 3.12 server,
copy the NBI31X.NLM file from the
NETWARE\NWSERVER\3.12 directory on TokenDisk
diskette #1 or the TokenDisk CD.
In either case, the destination directory should be the same
directory used for the driver.

User Guide Corrections

The TokenLink Velocity XL PCI Network Interface Card
User Guide (part number 09-1116-000) contains the
following errors.

NDIS 2.01 Driver Installation Instructions

The filename TLNKPN2.DOS should be TLPN2.DOS . On
page 5-2, change step 3 from:
copy a:\ndis2\dos\tlnkpn2.dos c:\temp
to:
copy a:\ndis2\dos\tlpn2.dos c:\temp

Wake-up On LAN Capability

The user guide states on page 1-3 that the 3C359 NIC
supports Wake-up On LAN capability as described in the
Advanced Configuration and Power Interface/OnNow (ACPI)
specification. The NIC does not support this capability.
XL PCI NIC R N
ELEASE OTES
® diskette #1 or the TokenDisk CD.