Advertisement
(3) "CH:" -- Adjustable Left/Right channel menu display. "CH: L" & "CH: R" indicate able to edit left & right
channel respectively. "CH: LR" means left & right channel is able to edit at the same time.
(4) "EQ" -- When this symbol is seen to indicate "EQ-ON". To on all filter: "EQ-OF", Auto & Single not affected,
"BYPA." -- BYPASS mode, all filter effect is not functioning.
(5) "FILT:"-- Able to select any filter from 1~12 by jog wheel when ":" blinks.
(6) ":PEQ"-- Turning rotary jog wheel while ":" blinking to select 4 types of filter mode from: OFF (off), PEQ
(parametric EQ), AUTO(automatic) & SING(single).
(7) To edit parameters of filter and parametric EQ. LCD reads "SV" to remind user that editable parameters is
ready for save & memory by 2 seconds
fast
for 1 second interval to remind user whether to save or not. Presses "STORE" button one time to save
and "SV" will disappear to indicate edited parameters had been save in present sequence. (If user does not
press "STORE" while "SV" blinking
2.2 Function Buttons & Jog Wheel
(1) PARAM/PUSH- Rotary Jog wheel with ON/OFF ability. While selecting "PEQ" in filter mode, press jog
wheel to enter parametric EQ editing (as fig.2.4).
FREQ: To select desire frequency
GAIN: To increase or decrease values for selected filter
BAND: To decide frequency band for selected filter, adjustable values from 2-time frequency range (120/60-
octave range) to 1/60 octave range.
(2) FILTER SEL- Sequence & Filter Select Button. Available 12 Filters or 10 channels. Press once to enter
Filter, press second times to enter sequence selects.
(3) FILTER MODE- Filter Mode Select Button. Press this button and turn jog wheel to activate "OFF" (off),
"PEQ" (parametric EQ), "SING" (single) & "AUTO" (automatic) modes. Press FILTER MODE & PARAM
/PUSH button together for 1 second, you are able to adjust Threshold of feedback compression from -3~-9dB.
(4) CHL, (5) CHR- Left and Right channel parameters button enable left & right channel editing. Press CHL
& CHR button to activate left & right channel function. Press left channel button "CHL" before pressing
"CHR" button to copy left channel parameters to right channel.
(6) IN/OUT (input/output) Button- allows optional bypassing of the parametric equalizer or all filters.
(7) STORE Button- Any preset parameters can be edited by STORE button. (Remarks: Press twice to store
data and symbol "SV" will disappear.)
slow
blinking interval. Press "STORE" button once and it will blink
fast
within 10 times, it will go back to
FILTER SET
CHL
IN/OUT
FILTER MODE
CHR
STORE
COUPLE
PARAM/PUSH
Fig 2.3 Function Buttons & jog wheel
FEEDBACK DESTROYER
CLIP
L
P
1
CH
FILE
3
CLIP
R
24 BIT DIGITAL PROCESSOR
Fig 2.4 Parametric EQ menu
I
I
0
0
POWER
MIDI
L
EQ-ON
PEQ
SV
slow
blink)
Page 5
Hide quick links:
Advertisement
