Advertisement
ATTENTION!
All DIGISYNTHETIC PRO products are carefully packed and designed to protect the units from rough handl
-ing before shipping out from the factory. Examine your good upon receiving, to ensure no damage during
transportation. Any damage claim should be inform & notify to relative dealer within 14 days of good received.
The dealer will not except failing of such. The consignee must make all shipping claims.
The DS212 fits into a standard 19" rack unit of space (1 3/4"). Allow at least an additional 4" depth for the
connectors on the back panel. Be sure that there is enough air space around the unit for cooling and ventilation.
DO NOT place the DS212 on high temperature devices like power amplifiers etc. to avoid overheating.
Using a main cable and a standard IEC receptacle makes the main connection of the DS212. It meets all of the
international safety certification requirements.
Please make sure that all units have a proper ground connection. For your own safety, do not remove the ground
connection within the unit or at the supply, or fail to make this connection at all.
Before switching voltage for local supply requirement, correct fuse type and rate must be installed. Refer to
4.Appendix.
This machine is only intended for qualified personnel to operate & install. Do not attempt to repair and service
yourself but referred to qualified technical service personnel. The user must have sufficient electrical contact
to earth. Electrostatic charges might affect the operation of the DS212.
Page 1
Hide quick links:
Advertisement
