Internet Settings; Connection Type - 3Com OfficeConnect 3CRWDR100B-72 User Manual

50 C 5: R
HAPTER OUTER

Internet Settings

Connection Type

C
ONFIGURATION
From these pages you can configure the settings for your DSL connection.
Figure 37 Connection Type Screen
The Connection Type screen is used to configure the parameters for your
DSL connection. The information necessary to complete these screens
should be obtained from your ISP.
First, select the DSL connection mode from the five options available:
PPPoE — PPP over Ethernet, providing routing for multiple PCs (see
■
page 51)
PPPoA — PPP over ATM, providing routing for multiple PCs (see
■
page 52)
Bridge Mode (for a single PC) — RFC1483 Bridged Mode, for single
■
PCs only (see
Routing Mode over ATM — RFC1483 Routed Mode, for multiple PCs
■
(see page 54)
Dynamic/Fixed IP in 1483 Bridge Mode (for multiple PCs) (see
■
Click Next.
page 53)
page 55)