Status; Lan Setup - 3Com OfficeConnect 3CRWDR100B-72 User Manual

40 C 5: R
HAPTER OUTER

Status

LAN Setup

C
ONFIGURATION
Figure 26 Status Screen
There are two buttons on this screen - Connect and Disconnect. These
buttons allow you to manually connect or disconnect your router from
your ISP's service.
Your Router is equipped with a DHCP server that will automatically assign
IP addresses to each computer on your network. The factory default
settings for the DHCP server will work in most any application. If you
need to make changes to the settings, you can do so.
The changes that you can make are:
Change the Internal IP address of the Router. The default is
■
192.168.1.1
Change the Subnet Mask. The default is 255.255.255.0
■
Enable/Disable the DHCP Server Function. Default is ON (Enabled)
■
Specify the Starting and Ending IP Pool Address. Default is Starting: 2 /
■
Ending: 254
Specify the IP address Lease Time. Default is Half day
■
Specify a local Domain Name. Default is NONE
■
To make changes, click LAN Settings on the main menu.