Verify Operation - Emerson THUM Quick Start Manual

Quick Start Guide
11

Verify operation

Operation can be verified using one of three methods: Field Communicator,
the Wireless Gateway's integrated web interface, or via AMS Device
Manager.
11.1 Verify operation using Field Communicator
For HART Wireless transmitter communication, a THUM Adapter DD is
required.The Field Communicator must be put into poll mode using the
THUM Adapter address of 63. Use the wired device documentation to
connect the Field Communicator to the THUM Adapter.
Table 11-1: Field Communicator Connections
Function
Communications
11.2 Verify operation using Emerson Wireless Gateway
If the THUM Adapter was configured with the Network ID and Join Key, and
sufficient time has passed for network polling, the transmitter will be
connected to the network. To verify device operation and connection to the
network with the Gateway's integrated web server, open the Gateway's
integral web interface and navigate to the Explorer page.
Note
It may take several minutes for the device to join the network.
11.3 Verify operation using AMS Device Manager
When the device has joined the network, it will appear in the AMS Device
Manager as illustrated below.
32
Fast Key sequence Menu items
3, 3 Join Status, Wireless Mode, Join Mode,
Number of Available Neighbors, Number
of Advertisements Heard, Number of
Join Attempts
Emerson.com/Rosemount
September 2020