Using The Handset - 3Com 3106C User Manual

Using the Handset

Handset Ringer Tone and Volume
1 Press the RING/VOL (3106C) button or the R/VOL (3107C) button on
the side of the handset when it is not being used for conversations (when
it is in AutoStandby mode) to change the ringer tone and volume.
The phone's display panel cycles through these possible settings:
■ Ring Type A High
■ Ring Type A Low
■ Ring Type B High
■ Ring Type B Low
■ Ring Type C High
■ Ring Type C Low
■ Ring Off
is the handset Vibrate Mode.
Ring off
If you set the ringer off and the handset is not on the charger, the
■
handset vibrates when there is an incoming call.
If you set the ringer off and the handset is on the charger, the handset
■
uses
Ring Type A Low
2 Stop pressing the RING/VOL (3106C) button or the R/VOL (3107C)
button when the handset ringer reaches the desired volume.
You can also turn the handset's ringer tone on and off using the NBX
NetSet utility. See
When you remove the handset from the charging unit and press the Talk
button, you see
ACQUIRING LINK
After the connection has been made between the handset and base unit,
you see the current volume setting. Example:
.
"Ringer Tones" in Chapter
.
Using the Handset
5.
.
Volume Low
29