110
A
A: T
PPENDIX
ELEPHONE
Selecting the
Installation
Location
I
M
NSTALLATION AND
AINTENANCE
Select a location that avoids excessive heat or humidity. The base unit of
the 3Com Cordless Telephone can be placed on a desk or tabletop near a
standard 120V AC outlet and an RJ45 connection to the LAN. The base
unit can also be mounted on a standard AT&T or GTE wall plate using the
wall mount adapter. Keep the base unit and handset away from sources
of electrical noise (motors, fluorescent lighting, computers).
Following are some additional installation recommendations:
If you are using three or fewer 3Com Cordless Telephones at your site
■
and require maximum operating range, use 3Com 3107C units.
If you are using more than three 3Com Cordless Telephones at your
■
site, use 3Com 3106C units.
For optimum performance, place base units at least 15 feet apart.
■
Place base units in the center of their coverage areas.
■
Place base units close to windows, when coverage areas extend
■
outdoors.
If you use more than one 3Com Cordless Telephone in your office,
■
each unit must operate on a different channel. Press the CH button
(3Com 3106C) or the Channel button (3Com 3107C) to select a
channel that provides the clearest communication on each unit.
If you encounter interference or noise, press the CH button
■
(3Com 3106C) or the Channel button (3Com 3107C), to try other
channels.