Replacing Fuses - Fiat 500 Owner's Handbook Manual

106
WARNING
143) Modifications or repairs to the electric
system that are not carried out properly
or do not take the system technical
specifications into account can cause
malfunctions leading to the risk of fire.
144) Halogen bulbs contain pressurised
gas, in the case of breakage they may
burst causing glass fragments to be
projected outwards.
145) Only replace the light bulbs when the
engine is off and in a position that does
not interfere with traffic and lets you safely
replace them (see the description in the
"Replacement" paragraph). Also ensure
that the engine is cold, to prevent the risk
of burns.
146) Before replacing the bulb, wait for the
exhaust ducts to cool down: DANGER
OF SCALDING!
147) Due to the high power supply voltage,
gas discharge bulbs (Xenon) should only
be replaced by specialised personnel:
danger of death! Contact a Fiat Dealership.
WARNING
49) Halogen bulbs must be handled
holding the metallic part only. Touching the
transparent part of the bulb with your
F0S0139
fingers may reduce the intensity of the
emitted light and even reduce the lifespan
of the bulb. In the event of accidental
contact, wipe the bulb with a cloth
moistened with alcohol and let the bulb
dry.
50) Where possible, it is advisable to have
bulbs changed at a Fiat Dealership. The
correct operation and direction of the
external lights are absolutely essential for
the safety of the car and of compliance
with the law.
51) The intervention must be carried out
taking all precautions necessary to avoid
damaging the bodywork (please use a
sufficiently rigid and appropriately thick
plastic card).

REPLACING FUSES

148) 149) 150) 151) 152) 153)
DASHBOARD FUSE BOX
To access the fuses you must remove
the press-fitted cover A fig. 107.
107
The 5 A fuse B for door mirror
demisting is located in the diagnosis
socket area, as shown in fig. 108.
108
F0S0066
F0S0677
121