Grundig VCC 4770 A Manual page 20

USAGE _ __________________________________
Adjusting the parquet/carpet
brush
Press the adjustment latch
quet/carpet brush
K
▪
Vacuum on firm ground and parquet; extend the
brush before vacuuming.
▪
Vacuum on carpets and rugs; retract the brush
before vacuuming.
Adjusting the suction power
You can adjust the suction power of the appliance
according to the type of the surface to be cleaned.
You can turn the suction power adjustment knob
found on the appliance's body clockwise to
B
increase the suction power. Turn the suction pow-
er adjustment knob anti-clockwise to decrease the
suction power.
There are four settings for suction power:
▪
Turn the suction power adjustment knob
wards the carpet icon to clean carpets.
▪
Turn the suction power adjustment knob towards
the eco icon to clean curtains, tablecloths and
sofas.
▪
Turn the suction power adjustment knob towards
the parquet icon to clean hard surfaces.
▪
Turn the suction power adjustment knob towards
the MAX icon to clean heavily soiled hard sur-
faces and carpets.
20 ENGLISH
J
located on the par-
and;
Operation
1
Plug in the appliance after pulling the power
plug located at the back of the appliance.
Warning
▪
Stop pulling the appliance cable when it comes
to the yellow mark located on it. After the yellow
mark, the red mark will come. Do not pull any
more after reaching the red mark.
2 Use the suction power adjustment knob
found on the appliance to set it to the desired
suction power.
3
Press the on/off button
pliance.
Accessories
Accessories have been designed in one piece to
save space and provide practical use.
Upholstery tool
1 Grasp it from the dust brush area and pull it
backwards slowly.
–
A click will be heard, indicating that the
to-
B
button on the body has seated into its slot.
2
Attach the end of the handle or the telescopic
tube to the inner side of the dust brush.
M
–
You can now start vacuum cleaning.
3 Pull the accessory to remove it when the process
is complete.
to switch on your ap-
A
B