Setting Up Traffic Priority Schedule Policy - 3Com IntelliJack NJ200 Supplementary Manual

3 C O M ® N J 2 0 0 N E T W O R K J A C K — V L A N S & T R A F F I C P R I O R I T I Z AT I O N
Figure 8. Traffic priority schedules are individually
configured for each PAN port.

Setting Up Traffic Priority Schedule Policy

Use this setting to modify how the switch will receive frames from each queue:
1. Open 3Com Central Configuration Manager
2. From the list of devices, select an NJ200/NJ205 and then select
also highlight and right-click on the NJ200/NJ205 and select
Hardware Settings
3. Click on the
Policy settings. You should see a window like this:
4. Under Priority Schedule Policy
a) 8,4,2,1 weighted fair queuing (default)
b) Strict Priority Scheme (all queues weighted the same)
5. When all configuration settings are complete, click on the
opens a password-prompt window. After the password is accepted a screen will
appear summarizing the new settings. Click
window.
and select Devices
Property
tab to view and configure the
, choose one of the following:
Apply
OK
to accept and close configuration
from the main menu.
Property
. You can
.
Priority Schedule
button, which
11