Table of Contents
Advertisement
QUICK START GUIDE EL-IPD-PRE-MSI
LINE LEVEL AUDIO OUTPUTS
There are 12 line level audio outputs that can be configured as left, right, mono, or subwoofer out. Each output or
combination of outputs can be configured as separate zones. Each zone can have a lip sync delay applied of up to
400ms with intervals of 10ms.
AUDIO INPUTS
There are 3 optical and 3 coax stereo digital inputs, 2 channel PCM, 16 RCA line level analog audio inputs that can
be configured as left, right, or mono, and a 3.5mm stereo input available. The RCA audio inputs can be configured
in pairs or independently as sources available to any zone. The digital inputs are independent of the line level analog
audio inputs and are available as sources to any zone. The doorbell input is typcally used to route audio from the
ELAN control system - including paging via the ELAN user interfaces and audio from video doorbells.
POWERING THE SYSTEM
Plug in the EL-IPD-PRE-MSI Multi Zone Preamp Audio Matrix using the
correct power cord for your region and engage the Main Power switch
on the rear.
Configuration
For detailed configuration information, download the ELAN integration note
and ELAN IP Amplifier Design Guide from www.elanhomesystems.com.
contact techsupport@elanhomesystems.com
11
Advertisement
Table of Contents
