Sony XBR-65X900A Repair Manual page 27

8. Press 3 to increase the data value from "0" to "1".
CHASSIS SERVICE
004 HDMI
002 RUN_EDID_SEQ
9. Press then 0
MUTING
10. Press 1 until 003 CHECK_SPI_FW item displays.
CHASSIS SERVICE
004 HDMI
003 CHECK_SPI_FW
11. Press 3 to increase the data value from "0" to "1".
CHASSIS SERVICE
004 HDMI
003 CHECK_SPI_FW
0
12. Press then
MUTING
13. Cycle AC Power (Unplug and plug AC Cord from the outlet).
14. When normal OSD (On Screen Display) graphics appear, wait 10
seconds and cycle AC Power again.
15. TV turns ON with normal OSD.
XBR-65X900A
1
to save the changes.
0
1
to save the changes.
SECTION 3 - REPAIR INFORMATION
16. Prepare TV to install the Software again.
Since the TV already has the latest Software installed, it must be
"forced" to install the latest version.
a. Press
POWER
b. Access Service Mode by pressing the following buttons within 1
second of each other:
DISPLAY
17. Press
OPTION
CHASSIS
000
000
18. Press 2 until 007 DL displays.
CHASSIS
007
000
3
19. Press to increase the data value from "0" to "1" from the
000 PID_DATA_MISMAT item.
CHASSIS
007
000
to turn OFF the TV.
+
5
Channel Volume
until the CHASSIS Menu appears.
SERVICE
WYVERN
S2_NOISE_TH
SERVICE
DL
PID_DATA_MISMAT
SERVICE
DL
PID_DATA_MISMAT
POWER
32
0
1
23