Sony XBR-65X900A Repair Manual page 23

7. When you turn ON the TV, there will be two cases depending on the
PANEL ID setting:
a. No Picture.
Smart Core LED blinking amber and green.
b. Picture appears.
Smart Core LED lit white.
8. Update the Software.
After ALL repairs UPDATE the SOFTWARE to the latest version.
Instructions are included with the Software package on the Sony
website.
a. Remove all signal connections from the TV.
(antennas, external input, ethernet cable, etc).
b. Insert the USB device with the latest Software into the TV.
NOTE: If older software package version is used, Smart Core
amber and green LED will remain blinking and Software can not
update.
XBR-65X900A
SECTION 3 - REPAIR INFORMATION
c. If valid file found, below message will appear:
NOTE: TV will reboot minutes after the USB device is inserted,
then the red LED lits and the amber LED blinks.
9. When the Software update is completed, expect one of the following;
a. The Smart Core LED will change to white blinking and TV goes
to Standby mode. Turn ON TV.
b. TV will reboot itself and message will appear to indicate Software
update is completed.
10. Remove USB device from the TV.
11. Access Service Mode by pressing the following buttons within 1
second of each other:
DISPLAY
12. Press
OPTION
13. Press 2 until 001 DATA_BACKUP displays.
VPC
001
000
+
5
Channel Volume
until the VPC Menu appears.
SERVICE
DATA_BACKUP
BU_FLASH
POWER
0
19