Inspection And Repairs; Electrical Safety; Mains Plug Replacement - Black & Decker OR11FD Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH

Inspection and repairs

Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to knob or
heating plate that may affect its operation.
Do not use the appliance is any part is
damaged or defective.
Any damages or defective parts must be
repaired or replaced by an authorized repair
agent.
Before use, check the power supply cord for
signs of damage, ageing and wear.
Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
If the power supply cord of mains plus is
damaged or defective, it must be repaired by
an authorized repair agent to avoid a hazard.
Do not cut the power cord and do not attempt
to repair it yourself.
Never attempt to remove or replace any
parts other than those specified in this
manual.

Electrical Safety

This product must be earthed. Always
check that the power supply
corresponds to the voltage on the rating plate.
Power plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1) appliances.
Unmodified plugs and matching outlets will
reduce the risk of electric shock.
To avoid risk of electric shock, do not
4
immerse the cord, plug or motor unit in water
or other liquid.
Check that the supply voltage shown on the
rating plate of the appliance matches that of
your electrical system. Any connection error
will invalidate the guarantee.
Extension cables and Class I
product
A 3 core cable must be used as your
appliance is earthed and of Class I
construction. Up to 30m (100 ft) can be
used without loss of power.

Mains plug replacement

If a new mains plug needs to be fitted:
Safely dispose of the old plug
Connect the brown lead to the live terminal
of the new plug
Connect the blue lead to the neutral terminal
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal.
Note: If your product is class II double insulated
(only 2 wires in the cord set), no connection is to
be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Warning! The above section on mains plug
replacement is for authorized service centre
personals.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Or12fdOr13fd

Table of Contents