Advertisement
8
O
C
ISDN LAN M
FFICE
ONNECT
R
N
V. 6.2.0 (ST)
ODEM
ELEASE
OTE
3 Select Single User and then click Next.
The Username and Password page appears, as shown in Figure 4.
Figure 4 Dial-In WIzard Password Screen
4 Enter a unique name and password to identify and verify this dial-in user when
dialing into this LAN Modem. This will match the username and password
configured on the client dial-in device.
5 Click Next.
The Dial-in Wizard Service Provider selection screen opens.
6 Choose the Service Provider which this dial-in user may access when dialing into
this LAN Modem. To disable remote service provider access for dial-in users,
choose None.
7 Click Finish.
This completes the dial-in configuration for single user. To continue setting up your
LAN Modem for dial-in access, go on to "Configuring the Client Site".
LAN Modem Site-to-Site Dial-In Wizard Instructions
1 From the LAN Modem main configuration page, click Dial-in.
2 Click Dial-in Wizard.
3 Select LAN Modem Site-to-Site and then click Next.
The password page appears.
4 Enter a unique name and password to identify and verify this dial-in user when
dialing into this LAN Modem. This will match the username and password which
will be entered in the client LAN Modem's service provider profile.
5.3.0 (U)
AND
Advertisement
