26" round concrete propane gas fire column (9 pages)
Summary of Contents for HAMPTON BAY Crestridge Padded Sling Glider RTS019N
Page 1
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you for choosing Hampton Bay!
Table of Contents Table of Contents ............2 Glider Assembly............5 Safety Information ............2 Care and Cleaning............10 Product Caution ..............2 Safety Warnings ..............2 Warranty ................ 2 What is Covered ..............2 What is Not Covered ..............
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity...
Glider Assembly Connecting the glider cross brace to the glider arms Insert the right and left arms (A and B) into the cross brace (C) on both sides. Fasten them together by using M6x30 bolts (BB), d6.5xD13x1.0 washers (EE), and M6xP1.0 plastic nuts (GG). NOTE: Loosely tighten all the bolts using the hex wrenches (HH and JJ).
Page 6
Glider Assembly (continued) Connecting the glider bottom frame to the glider arms Place the arm assembly on to the bottom frame (D). Make sure that the higher tube on the bottom frame (D) is facing the front of the glider. FRONT HIGHER TUBE...
Page 7
Glider Assembly (continued) Connecting the glider arms to the glider bottom frame Fasten the swing bars of the arm assembly to the bottom frame (D) by using M6x55 bolts (CC), d6.5xD13x1.0 washers (EE), and M6xP1.0 plastic nuts (GG). NOTE: Loosely tighten all the bolts using the hex wrenches (HH and JJ). HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Page 8
Glider Assembly (continued) Connecting the glider seat assembly to the glider arms At the front of the glider, fasten the seat assembly (E) to the arms (A and B) by using M6x16 bolts (AA) and d6.5xD13x1.0 washers (EE). NOTE: Loosely tighten all the bolts using the hex wrench (HH).
Page 9
Glider Assembly (continued) Connecting the glider seat assembly to the glider arms Fasten the seat assembly (E) to the right and left arms (A and B) by using M8x35 bolts (DD) and d8.5xD17x1.6 washers (FF). NOTE: Loosely tighten all the bolts using the hex wrench (II). HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance.
Glider Assembly (continued) Tightening the bolts Turn the glider to its upright position. Once all of the bolts are in place, fully tighten the bolts. Ensure all connections are secure before use. Care and Cleaning For best results, clean the set with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt particles that may accumulate.
Page 11
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.