Track / Disc Repeat; Track Scan - Kenwood KRC-479R Instruction Manual

Play starts at the beginning of the displayed disc.
Making a Forward Disc Search:
+
Press the DISC button to display the desired disc number.
Each time the button is pressed, the displayed disc number
increases by one.
Play starts at the beginning of the displayed disc.
NOTE
"LOAD" is displayed when discs are being exchanged on the disc
changer.

Track / Disc Repeat

Repeat playing the current track or disc.
Turning Repeat Play Function On/Off:
Press the REP button to switch the repeat play function on and
off as follows :
Track Repeat ON
Disc Repeat ON (Function of disc changers)
Track/Disc Repeat OFF
"TREP/REP ON" is displayed and the track number blinks in the
display when track repeat is on.
"DREP ON" is displayed and the disc number blinks in the
display when disc repeat is on.
NOTE
Repeat play is cancelled when you eject the disc.

Track Scan

Successively play the beginning of each track on a disc until
you find the track that you want to listen to.
Starting the Track Scan:
Press the SCAN button. "TSCN/SCN ON" is displayed and the
first 10 seconds of each track are played, and the tracks are
played in order.
The track number currently being heard blinks in the display.
Stopping to Listen to the Track Being Scanned:
Press the 38 or SCAN button again to stop the scan and keep
on listening to a track normally.
NOTE
• The track scan function is cancelled when you eject the disc.
• The track scan function only scans each track on a disc once.
— 17 —