Advertisement
6. install display brackets
Fasten the brackets using fasteners (length and size recommended by the display
manufacturer). Using improper screw length and size can damage the display.
NOTE: An assortment of screws and optional spacers have been provided in the PL100 kit.
Optional spacers are provided for additional clearance between the mount and the display,
if necessary.
6. install display
With the brackets now attached to the display, attach the display to the display
mount by inserting the shoulder washers through the upper, large diameter portion
of the teardrop shaped holes and gently allowing the four shoulder washers to seat
at the bottom of the teardrop shaped holes.
Salamander Unifi Huddle Lite, Cafe, Single Mount
8 of 8
501-735 [6.19]
Advertisement
