Download Print this page

Salamander UNIFI HUDDLE LITE Assembly Instructions Manual page 6

Cafe - single mount

Advertisement

4. install WALL FASTENERS (most applica
Install wall fasteners to marked location on wall & fasten cabinet.
Drill 1/2" diameter hole. Hold metal channel
A
flat alongside plastic straps and slide chan-
nel through hole.
Snap straps at wall by pushing side to
C
side,snapping of straps level with flange
of cap.
4B. install WALL FASTENERS (ALTERNATE
WOOD: Locate two framing studs using a stud finder device.
A
MASONRY: Place brackets in desired location.
B
Use a 3/16" [5mm] drill bit and drill holes 2.5" [64mm] deep.
Salamander Unifi Huddle Lite, Cafe, Single Mount
301-055
3/8 x 2" Alligator Wall Anchors
Hold ends of straps between thumb and
B
forefinger and pull toward you until channel
rests flush behind wall. Slide plastic cap along
straps with either hand with flange of cap is
flush with wall.
Move cabinet to wall and attach bracket.
D
Insert bolt through Bracket and tighten
until snug against wall.
6 of 8
tions)
)
300-470
5/16" Flat Washer
301-730
5/16 x 2.5" Lag Bolt
501-735 [6.19]

Advertisement

loading

This manual is also suitable for:

Uhl40a