Advertisement
Quick Links
UHL40A ASSEMBLY INSTRUCTIONS
UNIFI HUDDLE LITE, CAFE - SINGLE MOUNT
LIMITED WARRANTY FOR COMMERCIAL VIDEO DISPLAY STANDS, MOUNTS AND HUDDLE
Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter
any problem with your Salamander product, let us know. We are here to make it right. 1.860.761.9500
Full warranty including limitations and warranty claim information may be found at
www.salamandercommercial.com/warranty
Salamander Unifi Huddle Lite, Cafe, Single Mount
TIP HAZARD WARNING!
For use with video monitors weighing 175lbs (80kg) or less. Use with
heavier televisions may result in instability causing tip over resulting in
death or serious injury.
1 of 8
501-735 [6.19]
Advertisement
Related Manuals for Salamander UNIFI HUDDLE LITE
Summary of Contents for Salamander UNIFI HUDDLE LITE
- Page 1 Salamander is proud to stand behind our products with industry-leading warranties. Should you ever encounter any problem with your Salamander product, let us know. We are here to make it right. 1.860.761.9500 Full warranty including limitations and warranty claim information may be found at www.salamandercommercial.com/warranty...
-
Page 2: Important Safety Instructions
• For Commercial Use Only Weight Capacities – Max Load: D1/337AM1 - 175 lbs (80kg) ***** SAVE THESE INSTRUCTIONS ***** Accessories and Spare Parts Please contact Salamander Designs 860.761.9500 or www.salamanderdesigns.com Salamander Unifi Huddle Lite, Cafe, Single Mount 2 of 8 501-735 [6.19]... - Page 3 Support Post side channels 300-518 (4x) 1/4-20 X 3/8" BUTTON HEAD 300-540 (4x) SOCKET CAP SCREWS Joint Connector Bolt 5/16-18 X 50 MM 300-365 LEVELER 3/8-16X1.5" STEM Salamander Unifi Huddle Lite, Cafe, Single Mount 3 of 8 501-735 [6.19]...
- Page 4 The weld nuts are to be located inside of the tech shelf mount post slot. Both the tech shelf and speaker/ camera bracket can be positioned either above or below the display Use Double-Sided Tape (M) to secure device from sliding off shelf. Salamander Unifi Huddle Lite, Cafe, Single Mount 4 of 8 501-735 [6.19]...
- Page 5 C. Repeat this process for the remaining two mounting locations 35.25” from the floor. 48” Desk Width 9.125 37.000 35.250 FLOOR Mounting Locations D. Line up the mounting holes in the desk with the marked holes on the wall. Salamander Unifi Huddle Lite, Cafe, Single Mount 5 of 8 501-735 [6.19]...
- Page 6 Use a 3/16” [5mm] drill bit and drill holes 2.5” [64mm] deep. 300-470 5/16” Flat Washer 301-730 301-055 5/16 x 2.5” Lag Bolt 3/8 x 2” Alligator Wall Anchors Salamander Unifi Huddle Lite, Cafe, Single Mount 6 of 8 501-735 [6.19]...
-
Page 7: Mounting Locations
Remove stretcher and drill two 1/2" holes, then install Wall Fasteners. Attach stretcher to Mount Posts using four 303-524 screws as shown above. Install the two Wall Fastener Bolts through Panel Mount Stretcher into Wall Fastener. Salamander Unifi Huddle Lite, Cafe, Single Mount 7 of 8 501-735 [6.19]... - Page 8 Salamander Unifi Huddle Lite, Cafe, Single Mount 8 of 8 501-735 [6.19]...