Advertisement
5. COMPLETE WALL INSTALLATION
Place panel mount stretcher in position shown.
A.
Mark two mounting points in slotted mounting location.
B.
Remove stretcher and drill two 1/2" holes.
C.
D. Attach stretcher to mount posts using four 303-524 screws as shown
below. Install the two wall fastener bolts through panel mount stretcher
into wall fastener.
Place Panel Mount Stretcher in position shown at upper left and mark two mounting points
in slotted mounting location. Remove stretcher and drill two 1/2" holes, then install Wall
Fasteners. Attach stretcher to Mount Posts using four 303-524 screws as shown above. Install
the two Wall Fastener Bolts through Panel Mount Stretcher into Wall Fastener.
Salamander Unifi Huddle Lite, Cafe, Single Mount
COMPLETE WALL INSTALLATION
303-524 (4x)
SOCKET HEAD CAP SCREW
5/16-18 x1"
PANEL MOUNT
STRETCHER
7 of 8
SLOTTED
MOUNTING
LOCATIONS
501-735 [6.19]
Advertisement
