CHAPTER 2: INSTALLATION
EPM 5100 ELECTRONIC POWER METER – USER GUIDE
Courtesy of NationalSwitchgear.com
Unscrew the four mounting screws at the corners of the EPM 5100
Electronic Power Meter faceplate mounting frame and remove the
frame, as shown below.
FIGURE 2–6: Removing the Faceplate Mounting Frame
Attach the EPM 5100 Electronic Power Meter faceplate mounting
frame to the existing watthour meter case, reusing the mounting
screws as shown below.
FIGURE 2–7: Attaching the Faceplate
2–7