Advertisement

Quick Links

spexor
Original instructions
English

Advertisement

Table of Contents
loading

Summary of Contents for Bosch spexor

  • Page 1 Original instructions English...
  • Page 2 Shown in illustrations with white housing. However, spexor is also available in other colors. English | 2...
  • Page 3: Table Of Contents

    Contents About this manual  4 Safety  5 Description  11 Commissioning  21 Operation  28 Monitoring  29 Alarm functions  41 Charging the battery  44 Updating  45 Switching off and storage  49 Maintenance and service  50 Legal notice  55 English | 3...
  • Page 4: About This Manual

    About this manual Other applicable documents – Quick Start Guide from the scope of delivery – Short instructions from the scope of delivery Presentation of information Hazards and instructions are marked as follows in this user manual: – Note – Hazardous situation that may result in damage to property or the environment ▷...
  • Page 5: Safety

    ▷ Carry out all work exclusively according to the complete operating instructions. ▷ Only operate spexor if it is in a technically flawless condition. ▷ Keep the operating instructions and Quick Start Guide in a safe place. Don’t throw either one away!
  • Page 6 DIN and VdS standards. spexor is neither certified as a smoke detector in accordance with standard EN 14604:2005/AC:2008 nor is it suitable for this purpose.
  • Page 7 Do not modify spexor in any way. Do not open spexor. spexor does not contain any components that you can maintain or replace. Fire hazard! Only charge the battery of spexor with the charger supplied by the manufacturer.
  • Page 8 Exposure to fire and heat! Excessive heat can damage the battery or sensors. There is a risk of explosion or short circuit. Protect spexor from heat and keep it away from heat sources such as radiators or stoves and from open flames.
  • Page 9 Do not misuse the charger cable for other purposes, such as carrying or hanging spexor or to pull the plug from the electrical socket. Keep the charger cable away from heat, oil, sharp edges, tools and other machines.
  • Page 10 Store unused alarm devices out of the reach of children. Do not allow persons to use spexor who are not familiar with this device or who have not read these operating instructions.
  • Page 11: Description

    Description Scope of delivery – Alarm device spexor ▷ Check that all items listed (shown in illustrations in the scope of delivery with white housing) have been delivered and are free of defects. Do – Power supply unit not use damaged parts.
  • Page 12 Description Components Infrared motion sensor LED array bar ON/OFF switch Micro-USB port Screen guard to protect sensors Keypad for PIN input with LEDs English | 12...
  • Page 13 English | 13...
  • Page 14 Bluetooth®. White Short continuous light-up: Switch on at the ON/OFF switch. Short flashes: spexor is still switched on if it is touched or moved while monitoring is deactivated. Short flashes every 30 seconds: spexor is active when monitoring is activated.
  • Page 15 Description Green Six flashes sequentially emitted all around the LED array bar: spexor boots up after switching on. Pulse for 60 seconds: Indicates sensor calibration after monitoring is activated as well as the remaining time to leave the moni- tored room. Only then does spexor recognize an alarm event.
  • Page 16 A glance at the app shows you what the air quality in the room is like. Via its LEDs, spexor can also let you know when it’s time to ventilate the closed room. The LED display is often faster than the display in the app.
  • Page 17 It is roaming-enabled and compatible with all major network operators. If you are nearby, spexor establishes a direct connection to your smartphone and the app via Bluetooth®. This is only used when setting up and editing the device settings, but...
  • Page 18 This saves mobile phone time and conserves battery power. No matter where spexor is installed and how far away from your smartphone, it sends alarm messages via the mobile phone network with the permanently installed mobile phone card first to the automated Bosch data processing system.
  • Page 19 Description Technical Data – Batteries: Lithium-ion battery pack with 10 Ah, 3.7 V – Charging current: 1.6 A at 5 V – Battery self-discharge: approx. 4% per month – Charging time: approx. 8 h until fully charged – Supported smartphone operating systems (status 2021): iOS 12.0 or higher, Android 8.0 or higher –...
  • Page 20 Description – Mobile phone network: GSM, 2G (D2 Vodafone), eSIM roaming capable – Sensor detection: up to 5 m radius for motion detection – Audible alarm signal: approx. 70 ... 85 dB(A) – Permissible ambient temperature during operation and storage: –10 … +60 °C –...
  • Page 21: Commissioning

    Commissioning Installing app and setting up spexor ▷ Download the free “Bosch spexor” app from the Google Play Store or the Apple App Store. English | 21...
  • Page 22 ▷ The Bosch ID is a central authentication system of Robert Bosch GmbH that is used for many Bosch products or on Bosch Internet pages. It is best to use the Bosch ID user name and password for login. You can also create a new user account via the app.
  • Page 23 Always keep the QR code together with the Quick Start Guide for safekeeping. Don’t throw it away; you will need the QR code if you want to set up spexor again or transfer it to a new owner later. ▷ You can also make a copy of the QR code in the app so that you can e-mail it to yourself and preserve it for safekeeping.
  • Page 24 ▷ Load the app on any other smartphone and use the same access data during installation. Switching on spexor In its as-delivered condition, spexor is switched off and its battery may be severely discharged. ▷ Switch on spexor at its ON/OFF switch.
  • Page 25 An acoustic signal confirms that the device has been switched on. After switching on, the LEDs light up white briefly. While spexor boots up, they light up green six times. Charging the battery During the charging process the ambient temperature should be between 0 °C and +40 °C.
  • Page 26 Bosch ID on page 22. If you have forgotten your password, you can reset it in the app. ▷ You can now use the app to operate and configure spexor. English | 26...
  • Page 27 You can also control multiple alarm devices with your smart- phone. There is no limit to how many. You can add more alarm devices in the app. To do this, the spexor to be added must be turned on and the app must be running.
  • Page 28: Operation

    Operation The app is the communication interface for your spexor. You can use it to monitor different states of your spexor, such as the battery charge level as well as monitoring sensor measurements, e.g. of air quality. You can also manage your user account information,...
  • Page 29: Monitoring

    – Note – Exposure to fire and heat! Excessive heat can damage the battery or sensors. Protect spexor from heat and keep it away from heat sources such as radiators or stoves and from open flames. Battery performance depends on various factors, e.g. the ambient temperature.
  • Page 30 Monitoring ▷ Note the operating temperature range; see “Technical Data” on page 20. ▷ Only place spexor in closed rooms, e.g. inside a house or apartment, in a car, mobile home, garage, garden shed, etc. Close the windows. ▷ Only place spexor in dry places. Do not place spexor outdoors, e.g.
  • Page 31 Avoid closed or partially closed installation locations such as on a shelf between books, behind cabinet doors, in a cup holder or in the glove compartment. ▷ You can find further installation instructions on www.spexor-bosch.com. English | 31...
  • Page 32 People or animals on the other side of glass panes are not detected by the intrusion sensors. ▷ Position spexor in such a way that pets cannot be detected. English | 32...
  • Page 33 ▷ Of course you can also activate monitoring at any time via the app. Important: To ensure that spexor remains mobile for a long time and that its battery lasts as long as possible, it has English | 33...
  • Page 34 2 to 3 minutes whether you have activated or deactivated monitoring. So it can take 2 to 3 minutes until spexor reacts to your input in the app. This is normal and correct. – During battery operation, spexor is notified every 15 minutes whether you have activated or deactivated monitoring.
  • Page 35 Monitoring times were empirically tested during practical tests and times were selected that are neither too long nor too short. ▷ If you do not want to wait for this time, you can activate monitoring by entering the device PIN, see page 33. You will receive a push message when the monitoring has been successfully activated.
  • Page 36 – Note – Loud alarm signal! If an alarm is triggered, the audio module of spexor emits an acoustic signal that is loud enough to damage your hearing. Do not hold spexor directly against your ears or those of other people. Never...
  • Page 37 Settings At this point, you can also select various settings in the app. For example, you can specify whether spexor should emit an acoustic alarm, optical flashing alarm or discreetly send the alarm message to you in case of an alarm. In any case you will receive a message on your smartphone.
  • Page 38 In the standard setting with activated power save mode, the battery should last as long as possible. Activating monitor- ing can then take up to 15 minutes because spexor saves power by only communicating with the backend server every 15 minutes.
  • Page 39 ▷ If you flip the switch in the app, the power save mode is deactivated. spexor then works just as quickly as if it were connected to the mains power with the charging cable – activating monitoring or installing updates is much faster. However,...
  • Page 40 See page 33. It may therefore take a few minutes before spexor deactivates itself. ▷ If you want to check if spexor is still switched on when monitoring is deactivated, just touch it or move it a little. The LEDs flash white briefly if it is still switched on.
  • Page 41: Alarm Functions

    Bosch data processing back-end. Depending on the previous selection, the LEDs flash red for 10 minutes and spexor emits an alarm tone. When an alarm is active, spexor cannot be switched off at the ON/OFF switch. English | 41...
  • Page 42 It connects you to the emergency call center in the country where you are. If you are abroad and your spexor is monitoring your home, ask neighbors or friends to call the police in case of an alarm.
  • Page 43 If you want spexor to continue to monitor for you, then you must reactivate the monitoring.
  • Page 44: Charging The Battery

    ▷ To start the charging process, see “Charging the battery” on page 25. A full charge can take up to 8 hours depending on the ambient conditions. When connected to mains power, spexor can also continuously monitor and perform alarm functions during the charging process. English | 44...
  • Page 45: Updating

    Book additional functions ▷ In the future, you can extend the application areas of your spexor with additional functions or services (possibly subject to charge) in the app. The dates, types and costs of such additional functions have not yet been deter- mined.
  • Page 46 Important: For an update spexor needs WLAN. ▷ To deactivate the monitoring; see “Deactivating monitoring” on page 40. ▷ Use the USB cable to connect spexor’s Micro-USB port to the power supply unit. Then plug the power supply unit into the mains power.
  • Page 47 1 hour, because spexor will only be recognized as “update worthy” after 60 minutes. ▷ Only then open the app and start the update while spexor is still switched off. A pop-up appears. ▷ Before you select “Start with Bluetooth®” in the pop-up, switch spexor on again at the ON/OFF switch and acti- vate Bluetooth®...
  • Page 48 Updating Updating the app If an app update is available, you will automatically receive a message on your smartphone. ▷ Just follow the instructions of the operating system on your phone to update the app. If the app freezes and you can no longer enter data, please contact customer service;...
  • Page 49: Switching Off And Storage

    Switching off and storage ▷ If you do not need spexor, switch it off at the ON/OFF switch. Three short, falling signal tones confirm that the device is switching off. After switching off, the LEDs light up red briefly. ▷ Note the storage temperature range; see “Technical Data”...
  • Page 50: Maintenance And Service

    – Note – Modifications to spexor can result in hazardous damage to the battery, short circuit and malfunction. Do not modify spexor in any way. Do not open spexor. spexor does not contain any components that you can maintain or replace.
  • Page 51 Cleaning – Note – Risk of damage! Penetrating water or chemicals can damage or destroy spexor. Do not use either water or chemicals to clean spexor. ▷ It is best to use a soft, clean, dry and lint-free cloth to clean your spexor, cable and power supply unit.
  • Page 52 You can find answers to frequently asked questions on www.spexor-bosch.com under “FAQ” or in the app. The spexor customer service will be happy to help you with any questions regarding spexor and the app. ▷ e-mail: support-spexor@bosch.com English | 52...
  • Page 53 Maintenance and service Transfer or disposal of device ▷ Before disposing of your spexor or handing it over to a new owner, delete all individual data by selecting the “Delete device” menu item under “Devices” and “Settings” in the app.
  • Page 54 ▷ Return spexor to the appropriate return or collection system for proper disposal. If this is not possible, contact the dealer from whom you purchased your spexor or the customer service department; see page 52. According to the European Directive 2012/19/EU...
  • Page 55: Legal Notice

    Legal notice EU Conformity grow platform GmbH hereby declares that the radio communication device type spexor complies with the Directive 2014/53/EU. The complete text of the EU Declaration of Conformity is available for download at www.spexor-bosch.com. License The Bluetooth® word mark and logos are registered trade- marks of Bluetooth SIG, Inc.
  • Page 56 GmbH Team spexor Grönerstraße 9 71636 Ludwigsburg Germany V04 Online...

Table of Contents