Table of Contents
Advertisement
News Bulletin with Timeout Setting
It switches automatically when a news bulletin starts even if the
radio isn't being listened to. Also, the time interval when
interrupt is prohibited can be set.
Display and Setting
"NEWS OFF"
"NEWS 00M"
"NEWS 90M"
When "NEWS 00M" — "NEWS 90M" is set, the News Bulletin
Interrupt function is ON.
When it's ON, the "NEWS" indicator is ON.
When the news bulletin starts, "NEWS" is displayed, and it
switches to the news bulletin.
• If you choose the "20M" setting, further news bulletins will not be
received for 20 minutes once the first news bulletin is received.
• The news bulletin volume is the same level that was set for traffic
information (page 12).
• This function is only available if the desired station sends PTY-code
for news bulletin or belongs to <Enhanced Other Network>-
Network sending PTY-code for news bulletin.
• When the News Bulletin Interrupt function is ON, it switches to an
FM station.
Local Seek <In Tuner mode>
Only stations whose reception is good are searched for in auto
seek tuning.
Display
"LO.S OFF"
"LO.S ON"
Setting
The local seek function is OFF.
The local seek function is ON.
Tuning Mode <In Tuner mode>
Sets the tuning mode.
Tuning mode
Auto seek
Preset station seek "AUTO 2"
Manual
Auto Memory Entry <In Tuner mode>
For the operation method refer to <Auto Memory Entry> (page
10).
— 19 —
Display
Operation
"AUTO 1"
Automatic search for a station.
Search in order of the stations
in the Preset memory.
"MANUAL" Normal manual tuning control.
Hide quick links:
Advertisement
Table of Contents
