Table of Contents
Advertisement
62
6. Interior Structure
Thermal curtain
6.7 Thermal curtain for driver's cab *
To install
• There is a cover flap along the top edge of the curtain that
must be pushed between the headliner and the sun visor.
• Fasten the pushbuttons to their counterparts on the B-pillar.
This ensures that the curtain is closed tightly and has suffi-
cient support.
Before driving, the thermal curtain must be entirely removed
from the driver's cab and stored in the vehicle.
The thermal curtain has a flap that enables you to reach the
radio and the ventilation. The flap is closed by means of a
magnetic lock and a button to hold it closed.
If there is no frost outside and you are in a bit of a hurry, it is
enough to simply set up the curtain and push the cover flap
between the headliner and the sun visor. In this case, there
is no need to fasten the sides of the curtain.
Footwell insulation
Place the trough-shaped footwell insulation in the footwell
of the driver's cab.
The footwell insulation must be completely removed from
the driver's cab before driving.
Advertisement
Table of Contents
