Table of Contents
Advertisement
130
8. Water
Waste water tank
The waste water tank is integrated in the chassis; it is insulated.
Optional
After the electric waste water tank heating system has been swit-
ched on on the control panel, the tank is heated by a heating
cartridge. This prevents the waste water from freezing in a light
frost (please refer also to the description on p. 78).
Do a small quantity of antifreeze agent (e.g. table salt) to
the waste water tank if temperatures are significantly below
freezing to prevent the waste water from freezing.
The waste water tank is not sufficiently protected against
damage from frost when the vehicle is not in use. Therefore,
if there is any danger of sub-zero temperatures empty the
waste water tank completely.
Never pour boiling water down the sink. This can cause dis-
tortions and leaks in the waste water system. Always add
cold water before pouring.
Use the control panel to check the amount of water in the
waste water tank.
8.3 Toilet
The pivoting toilette consists of two parts: a fixed toilette and a
removable waste tank. Before the toilet can be used, the waste
tank must first be prepared as described below and then returned
to its original position.
Preparing the waste tank
• Open the Thetford door (see 5.2 Toilet flap) and pull the
holding bar up to remove the waste tank.
The waste tank can only be removed when the drain valve
is closed.
Advertisement
Table of Contents
