Bluetooth Setup; Easy Pairing Function - Kenwood KDC-BT41U Instruction Manual

Bluetooth Setup

Function of KDC-BT41U/ KDC-BT31U

Easy Pairing function

1 Press and hold
mode
"PAIRING" is displayed.
■
Any of the following is displayed
depending on cell-phone registration
condition:
"SEARCHING": When registering a cell-
–
phone for the first time.
"(cell-phone name)": When a cell-phone
–
has already been registered.
"DEVICE FULL": When maximum of
–
five cell-phones have already been
registered.
When registering a cell-phone for the first
time, registering a cell-phone
"SEARCHING" is displayed.
2
Search for the Bluetooth device.
When search is completed, "FINISHED" is
displayed.
Turn the volume knob to select a cell-
3
phone name, press to confirm.
Input the PIN code
4
■
Turn the volume knob to select the
number.
To move to the next digit, press ¢.
■
To delete the last digit, press 4.
■
Press the volume knob to transmit the
5
PIN code.
If "PAIRING OK" is displayed, registration is
completed.
When "CONFIRM PHONE" is displayed,
confirm connection with a cell-phone
operation.
The receiver is connected to a cell-phone,
6
with "HF CONNECT" displayed, and exits
the easy pairing mode.
■
If an error code is displayed during paring,
see <Troubleshooting> (page 33).
to enter easy pairing
When a cell-phone has already been
registered, or maximum of five cell-phones
have already been registered/ selecting a
cell-phone
"(cell-phone name)" or "DEVICE FULL" is
2
displayed.
3 Turn the volume knob to select a cell-
phone name.
■
To register a new cell-phone, select "[DVC
SEARCH]" or "[DV SEARCH]", then go to
"When registering a cell-phone for the
first time."
Press the volume knob to set up the
4
cell-phone.
■
"✱(cell-phone name)": The selected
Bluetooth device is busy.
■ "-(cell-phone name)": The selected
Bluetooth device is on standby.
■
" (cell-phone name)": The Bluetooth
device is deselected.
■
If a cell-phone is already selected,
deselect it, and then select a different
one.
Press to exit easy pairing mode.
5
Deleting the registered cell-phone
"(cell-phone name)" or "DEVICE FULL" is
2
displayed.
Turn the volume knob to select a cell-
3
phone name.
4 Press and hold the volume knob to delete
the selected cell-phone.
"DELETE" is displayed.
Turn the volume knob to select "YES",
5
then press to confirm.
"COMPLETED" is displayed.
19
English