Chevrolet Spark 2021 Owner's Manual page 59

58 Seats and Restraints
area if it interferes with the
attachment of the top tether to the
top tether anchor.
2.3. Route, attach, and tighten the top
tether according to your child
restraint instructions and the
following instructions:
If you are using a single tether in
an outboard seating position and
the head restraint has been
removed, route the tether over the
seatback.
If you are using a dual tether in an
outboard seating position and the
head restraint has been removed,
route the tether over the seatback.
If the rear outboard seating position
you are using has an adjustable
head restraint and you are using a
single tether, raise the head
restraint and route the tether under
the head restraint and in between
the head restraint posts.
If the rear outboard seating position
you are using has an adjustable
head restraint and you are using a
dual tether, raise the head restraint
and route the tether under the
head restraint and around the head
restraint posts.
3. Before placing a child in the child
restraint, make sure it is securely held in
place. To check, grasp the child restraint
at the LATCH path and attempt to move
it side to side and back and forth. There
should be no more than 2.5 cm (1 in) of
movement for proper installation.
Head Restraint Removal and
Reinstallation
The rear outboard head restraints can be
removed if they interfere with the proper
installation of the child restraint, see