Av Input Setup; Av Interface Setup; [Av-In Setup]; [Av Interface] - Kenwood DDX6046BT Instruction Manual

AV Input Setup

You can set AV input parameters.
1 Display the AV-IN Setup screen
>
Touch [ [ [ [ [ ] [ [
2 Set each item
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (
"Auto": Information is displayed for 5 seconds
when updated.
"Manual": Information is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (
[AV-IN1 Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
( "VIDEO")
⁄
• [iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected.
• [AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected.
DDX SERIES DDX616/DDX6046BT/DDX516
>
] [AV-IN SETUP]. (page 62)
"Auto")
"iPod")

AV Interface Setup

You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
>
Touch [ ] [ ]
2 Set each item
[AV-OUT] Selects an AV source to be output at
the AV OUTPUT port. (
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
( "OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
⁄
• When in DVD source, "AV-OUT" cannot be set to USB.
When in USB source, "AV-OUT" cannot be set to DVD.
>
[AV Interface]. (page 62)
"AV-IN1")
English 73