Tv Watching; Functions During Tv Screen; Functions When Displaying The Easy Control Panel - Kenwood KVT-829DVD Instruction Manual

TV Watching

Various control screens appear in the TV Source mode. (You can only operate TV with the optional
accessory TV Tuner connected.)

Functions During TV Screen

Basic functions are available even when the TV
screen is displayed.
Display the TV screen
1 2
Group 1
TV TV1
AUTO1 Mode :
6 7
8
Group 1
TV TV1
AUTO1
1 TV Band Number Display
2 TV Area Group Display
Refer to <TV Setup> (page 83).
3 Memory Number Display
4 Channel Number Display
5 Channel Up Area
Increase the channel.
Use the <Seek mode> (page 46) to change
the channel tuning sequence.
6 Channel Down Area
Decrease the channel.
Use the <Seek mode> (page 46) to change
the channel tuning sequence.
7 Band Switch Area
Switches to TV1 or TV2.
8 Information Display Button Area
⁄
• For TV picture selection and receiver button operations,
see <Basic operations> (page 12).
• The information display is cleared automatically after
approximately 5 seconds. Also, the information can be
displayed automatically when it is updated.
3 4
Preset 1
2 c h
F u l l AV- O U T: AV- I N 1
5
Preset 1 2 c h
IN AF
Functions When Displaying the Easy
Control Panel
Displays a floating control panel in the screen.
TV TV1 Group 1 Preset 1
AUTO1
Mode :
Group 1
TV TV1 Preset 1
AUTO1
TV TV1
AUTO1 Mode :
6
EXT SW
1 2
S R C
TV TV1
AUTO1
1 Switches the source.
2 Switches the TV band (to TV1 or TV2).
3 Select a channel.
Use the <Seek mode> (page 46) to change
the channel tuning sequence.
4 Switches the Seek mode.
(page 46 for the <Seek mode>)
5 Displays the Screen Control screen.
(page 59 for the <Screen Control>)
6 Displays the external device control screen.
See <External Device Power Supply
Control> (page 56).
⁄
• The Easy Control Panel display is hidden when you touch
a central area of the monitor.
2 c h
F u l l AV- O U T: AV- I N 1
2 c h
IN AF
2 c h
F u l l AV-OUT: AV - I N 1
5
SCRN
3 3 4
Band SEEK
2 c h
IN AF
English 45