3 Using Humidiprobe; 3.1 Specifications; 3.2 Connecting Humidiprobe (Quick Guide) - pico Technology HumidiProbe Quick Start Manual

4 HumidiProbe User's Guide
Using HumidiProbe
3
3.1 Specifications
Humidity
Range
Accuracy
Resolution
Response time
Temperature
Range
Accuracy
Resolution
Response time
Conversion time
Interface
Connector
Enclosure
Dimensions
Material
Protection
3.2 Connecting HumidiProbe (quick guide)
connecting your HumidiProbe to the computer for the first time.
Once the software is installed, connect the HumidiProbe to the USB port on your computer using
the integrated cable and connector.
To set up the unit with PicoLog, do the following:
1. Open PicoLog Recorder.
Select New settings from the File menu.
2.
In the Recording dialog box, click OK .
3.
4. In the Sampling Rate dialog box, click OK .
In the Converter details dialog box, select HumidiProbe from the drop-down box and click
5.
OK .
In the HumidiProbe Channels dialog box, double-click on Temp unused .
6.
In the Edit HumidiProbe Channel dialog box, click OK and PicoLog will activate the
7.
Temperature parameter.
In the HumidiProbe Channels dialog box, double-click on Humidity unused .
8.
9. In the Edit HumidiProbe Channel dialog box, click OK and PicoLog will activate the Humidity
parameter.
10. In the HumidiProbe Channels dialog box, click OK .
11. PicoLog Recorder should now display the temperature and humidity.
For a more detailed description of the procedure, see
HumidiProbe044-3
0% to 100% relative humidity (non-condensing)
±2%
0.03%
4 seconds
0 to +70°C
±0.5°C
0.01°C
5 to 30 seconds
2 seconds (humidity and temperature)
USB 1.1 (compatible with USB 2.0)
Integrated USB cable and connector
Ø 22 mm, length 170 mm
(approx. 4.5 m including cable)
Grey ABS
NOT waterproof
Important note:
Always install the PicoLog software BEFORE
Connecting HumidiProbe (detailed
Copyright © 2005-2007 Pico Technology Limited. All rights reserved.
guide).