pico Technology HumidiProbe Quick Start Manual

Introduction
1
1.1 About HumidiProbe
1.2 Intended use
HumidiProbe is suitable for measuring temperature and relative humidity in benign environments,
particularly indoors. You must not expose the unit to temperatures outside the maximum range
(see Specifications).
The driver software, which runs under Microsoft Windows XP SP2, Vista or later, contains
everything necessary to convert the sensor readings into temperature and relative humidity.
1.3 This document
This document describes the physical and electrical properties of HumidiProbe, and explains how
to use the software drivers.
For more information about using HumidiProbe with PicoLog, please consult the following files:
plw.en.chm (Windows help file)
PLW044.pdf (printable PDF file)
Copyright © 2005-2007 Pico Technology Limited. All rights reserved.
HumidiProbe is a complete, self-contained temperature
and humidity measuring device. It is calibrated to give
highly accurate readings, which it takes every two
seconds from a dual-purpose humidity and temperature
sensor. Its USB connector is compatible with standard
PCs and laptops
The PicoLog data logging program will collect data
supplied by the HumidiProbe, or you can use the
HumidiProbe driver software to custom-build your own
programs that take advantage of its features.
PicoLog and the driver support up to four HumidiProbe
units.
Introduction
1
HumidiProbe044-3