Table of Contents
Advertisement
There is a "Comment" tab where you can write some comments which will be displayed on
the gait report. To enter some text, click on the line, when you are finished no confirmation
is needed, the text is immediately saved. To exit the keyboard, press the system "Back"
button of the tablet.
3.4
Start the recording
To start the sensors, click on the "Start" button inside the application. The Physilog® LED
will become green for a short moment and then start to blink green, where each blink is two
short green flashes.
The best practice is to start the sensors when they are already attached to the foot just
before starting the gait test. The recording will start shortly after sending the start signal,
during a short synchronisation period the app ensures that sensors receive synchronisation
signals and when the countdown (3,2,1, Go) has arrived at "Go" you can instruct the subject
to start to walk according to your protocol. The displayed stopwatch will start at "Go" and
stop when you press "Stop".
3.5
Walk
Gait Up's PhysiGait Live system can be used to measure various walking tests, the system
is designed for logged gait tests of various length and protocol such as 20m gait test, 6min
walk test or a figure-of-eight test. When measuring several different protocols or conditions
it is recommended to do a measurement for each trial, that is: start and stop the recording
for each test.
The subject should not go further away than 15m from the tablet, otherwise the connection
between the sensor and app may get lost and the file transfer is interrupted. The tablet must
have internet connection to be able to upload the files to the server at the end of the
measurement.
PhysiGait user manual v1.3.1 Date: 29.04.2019
Copyright © 2018, All Rights Reserved - Gait Up SA. CH-1015 Switzerland
EPFL Innovation Park, Bat C. CH-1015 Lausanne
Gait Up SA
www.gaitup.com
TVA CHE-145.136.760
6
Advertisement
Table of Contents
