Preparation For Use - Kenwood XD-355 Instruction Manual

PREPARATION FOR USE

•
Unplug the AC power cord from the AC socket before connecting or disconnecting any component.
Speakers (XD-655, XD-655E)
Right speaker
Red
Black
Speaker connection
Connect each speaker wire to the SPEAKERS ter-
minals as shown. Use speakers with an impedance
of 6 or more, as lower impedance speakers can
damage the unit.
Connect the black wire to the minus (-) terminal,
and the red wire to the plus (+) terminal.
Caution :
• Do not mix the right channel and left channel
wiring when connecting the speakers to the unit.
The right speaker is the one on the right side
when you are facing the front of the unit.
• Do not let bare speaker wires touch each other
as this may damage the amplifier and/or speak-
ers.
• Do not allow any objects to fall into or to be
placed in the bass reflex ducts.
• Do not stand or sit on the speakers. If the speak-
ers fall or collapse, you may be injured.
8
Left speaker
Red
Black
Speakers (XD-355, XD-355E)
Right speaker
Red
Black
System Name
XD-655 / XD-655E
XD-355 / XD-355E
Left speaker
Red
Black
Speaker Model
Name
LS-N50S
LS-N30S