Download Print this page

Demonstration; Hardware Installation; Download Code And Upload; Check The Result - SeeedStudio Grove User Manual

3-axis digital gyro module

Hide thumbs Also See for Grove:

Table of Contents

3. Demonstration

This demo will show you how to get data from this digital gyro, the data is in the unit of rad/s.

Here we need a Grove - 3-Axis Digital Gyro and a Seeeduino V3.0.

3.1

Hardware installation is very easy, because there's an I2C Grove in Seeeduino,

so what we need to to is connect it to I2C Grove via a Grove cable.

3.2

You can download the library in github, click

Then open File -> examples -> Grove_3_Digital_Gyro -> ITG3200_gyro, you can open the demo

code.

Click Upload to Upload the code, if you have any problem about how to start Arduino, please

here

click

for some help.

3.3

Now, you can open the serial monitor to check the result.

here

, then extract it to libraries folder of Arduino.

Table of Contents

Do you have a question about the Grove and is the answer not in the manual?