Recording; General Recording - Kenwood DM-VH7 Instruction Manual

Recording

26
The input jacks connected with audio cords accept analog signals. This unit records the analog signal from the
REC IN jacks by converting it into digital signal. (This recording is simply referred to as analog recording.)
When this unit and CD player are connected with an optical fiber cable, the digital signal input through
the DIGITAL IN (OPTICAL) jack can be recorded in a digital form (this recording is hereinafter referred to
as digital recording). Enjoy high sound quality of digital recording.
÷ Open the write protect tab of the
Preparation
Mini Disc to make it recordable.
÷ Check the remaining recording time.

General recording

1
Set the amplifier's input selector to the source to be recorded.
2
Select the REC INPUT.
REC INPUT
3
Adjust the recording level.
1 Play the source to be recorded.
(This operation is not required when re-
cording radio broadcasting.)
2 Press the MONITOR key
3 Adjust the recording level.
To decrease
1
level
4 Stop the source to be recorded.
(This operation is not required when re-
cording radio broadcasting.)
4
Put the MD recorder in record-pause mode.
8
º
MONITOR
To increase
¡
level
÷
Each press switches the mode.
ANALOG
DIGITAL 1 (DIN CD)
DIGITAL 2 (DIN AUX)
MONO
¶ Select "DIGITAL 1" or "2" for recording a digital input or
"ANALOG" or "MONO" for recording an analog input.
¶ When other components are connected through system
control cords, the display becomes as shown inside ( ).
¶ The recording level can be adjusted even during recording.
¶ Press the MONITOR key again to cancel monitoring.
Example of display when the RD-VH7 is connected
through a system control cord
A.IN AUX
LEVEL-12dB
TRACK
MONITOR
AUTO
ANALOG
L
R
Adjust so that these segments light at times.
¶ Adjust so that the segments before the vertical bars near
the right end of the level meter light occasionally.
¶ The initial recording level is -12 dB for analog input
recording and 0 dB for digital input recording.
¶ The recording level can also be adjusted using the rec
level keys on the main unit.
¶ Press the record (¶) key to enter record-pause mode
automatically.
DM-VH7 (EN)
º
Level value