Systematized Recording Features; Recording A Single Cd Track (O.t.e.); Recording All Tracks On A Cd (O.t.e.) - Kenwood DM-VH7 Instruction Manual

Systematized recording features

24
When this unit is connected with the CD receiver (RD-VH7) through a system control cord, desired tracks
can be selected while playing a CD and recorded automatically onto an MD. This function is referred to
as O.T.E. (One Touch Edit). The synchronized recording with CD also possible in this configuration.
Preparation
÷ Connect the digital output of the CD receiver to
DIGITAL 1 input of the MD recorder.
÷ Select the CD input on the CD receiver.
÷ Load a recordable MD in the MD recorder.

Recording a single CD track (O.T.E.)

1
Play the track to be recorded.
2
Press the O.T.E. key.

Recording all tracks on a CD (O.T.E.)

1
Stop CD playback.
2
Press the O.T.E. key.
@
8
O.T.E.
O.T.E.
Display when an MD is loaded
Recordable MD Recording-pro-
tected MD
¶ When the O.T.E. key is pressed during CD playback, the
track being played will be replayed from the beginning
and only this track will be recorded.
¶ After the track has been recorded, the MD recorder
stops and the CD player enters pause mode.
¶ With O.T.E. recording, the recording input is automati-
cally set to DIN CD (digital) and the recording level is
automatically set to 0 dB.
¶ It is not possible to change the recording input or
recording level during O.T.E. recording.
Press the stop (7) key to stop recording in the middle.
¶ When the O.T.E. key is pressed while the CD player is
in stop mode, all of the tracks of the CD will be recorded.
¶ After the track has been recorded, the MD recorder
stops and the CD player enters pause mode.
¶ With O.T.E. recording, the recording input is automati-
cally set to DIN CD (digital) and the recording level is
automatically set to 0 dB.
¶ It is not possible to change the recording input or
recording level during O.T.E. recording.
Press the stop (7) key to stop recording in the middle.
DM-VH7 (EN)
Playback-only
MD