Table of Contents
Advertisement
62
5
Reserve the timer operation.
Turn the VOLUME/MULTI CONTROL knob to
select "ON", then press the SET/ DEMO key.
VOLUME/
MULTI CONTROL
6
Adjust the volume.
7
Put the unit in standby mode.
(When the unit enters the Standby mode, the
STANDBY/TIMER indicator lights in amber.)
When timer operation is not required
When power is ON, press the TIMER key to turn off
the timer-related indicators completely.
Each press switches the timer as
follows.
TIMER
÷ The reservation contents are held in memory.
To check or modify the reservation contents, restart the timer reservation from the beginning.
SET/DEMO
\
1 O.T.T.
1
2
1
2
3
1 2
4
5 Extinguished
P
R O
G .
÷ When the timer setting is completed by pressing the
SET/DEMO key, "COMPLETE" is displayed.
÷ Use the same procedure as above when you want to
reserve a program timer operation in PROG.2.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the STANDBY/TIMER indicator blinks in amber. In this
case, the clock setting should be restarted from the
beginning.
After setting the timer, make sure that the power is
set to OFF (Standby).
To set the same timer program again
When power is ON, press the TIMER key to turn on
the timer-related indicators completely.
Each press switches the timer as
follows.
1 O.T.T.
TIMER
2
3
4
5 Extinguished
÷ Be sure to load a disc and adjust the listening vol-
ume.
Timer operation
1
>
O
N
1
1
2
1 2
Advertisement
Table of Contents
