Table of Contents
Advertisement
"SOUND" Setting
"SOUND" is to be selected when you want to set the audio output method when system components are
connected using the digital audio output connector of the player. Also select "SOUND" to set audio output
during DVD or VCD search and dynamic range control function.
When "SOUND" is selected in "SET UP MENU":
"Digital Audio PCM Down Conversion" Setting
Switches on/off the down-sampling conversion for the
digital signal output with a high sampling rate.
"Digital Audio Dolby Digital" Setting
Sets the Dolby Digital output.
"Digital Audio DTS" Setting
Sets the DTS output.
Select the "DVD/CD" input. ¢
1
Select "SET UP MENU SOUND".
Press in stop mode
1
Press the SET UP key.
2
Press either cursor (5 ∞) key to select
"SET UP MENU SOUND", then press the
ENTER key.
5
5
2
Select the item to be set.
Press either cursor (5 ∞) key to select the
item to be set, then press the ENTER key.
5
5
SET UP
\
ENTER
\
ENTER
ENTER
"Digital Audio MPEG" Setting
Sets the MPEG output.
"Audio During Search" Setting
Switches on/off the audio during search.
"Dynamic Range Control" Setting
Switches the dynamic range control function.
SET UP MENU
SET UP MENU
SOUND
÷ Press the RETURN key or cursor (3) key while the
"SET UP MENU" menu is displayed to exit from the
setup mode.
SOUND
Digital Audio
PCM Down Conversion
Dolby Digital
Audio During Search
Dynamic Range Control
÷ Press the cursor (3) key while a setting menu is
displayed to exit from the setup mode. (Pressing
the RETURN key or cursor (2) key returns to the
"SET UP MENU".
Changing the initial setup (DVD)
EXIT
On
7
Bitstream
7
Bitstream
7
7
Bitstream
On
7
7
Wide
Continued on next page
41
Advertisement
Table of Contents
