Table of Contents
Advertisement
42
3
Change the content of the selected item.
Press either cursor key (5 ∞) to change the
setting, then press the ENTER key.
5
5
Function items
"Digital Audio PCM
Down Conversion"
"Digital Audio Dolby
Digital"
*1
"Digital Audio DTS"
"Digital Audio MPEG"
No digital signal is output when an MP3 file is played back.
*1 Set to "PCM" when connecting the equipment other than a Dolby Digital decoder. If this item is set to
"Bitstream", loud noise may be produced and speakers may be damaged.
*2 Noise may interfere with the speaker output if the player is connected to a piece of equipment which does not
incorporate an DTS decoder. Never connect the player to equipment without a built-in DTS decoder.
\
ENTER
"On" : Select to down-convert the signal to 44.1 kHz/16-bit PCM signal. Select
this setting when the connected AV amplifier is incompatible with 96 kHz
digital input.
÷ The analog output signals are also converted accordingly.
"Off" : Select to skip down conversion. Select this setting when the connected
AV amplifier is compatible with 96 kHz digital input. However, if the disc in-
hibits the 96 kHz digital output, the signal is down-converted even when this
setting is selected.
"Bitstream" : The signal is output as a bitstream. Select when connecting a
component containing Dolby Digital decoder.
"PCM" : The signal is converted onto 48 kHz (2ch.) PCM signal before being
output. Select when connecting a component without Dolby Digital decoder.
*2
"Bitstream" : The signal is output as a bitstream. Select when connecting a
component containing DTS decoder.
"Off" : No digital signal is output.
"Bitstream" : The signal is output as a bitstream. Select when connecting a
component containing MPEG decoder.
"PCM" : The signal is converted onto 48 kHz (2ch.) PCM signal before being
output. Select when connecting a component without MPEG decoder.
Changing the initial setup (DVD)
SOUND
Digital Audio
PCM Down Conversion
Dolby Digital
DTS
MPEG
Audio During Search
Dynamic Range Control
÷ Select "
" and press the ENTER key to return to the set-
ting menu. (Pressing the RETURN key or cursor (2) key
also returns to the previous setting menu.)
Setting items
7
On
7
7
Off
Advertisement
Table of Contents
