Advertisement
Available languages
Available languages
E020401CW
and press "ENTER" to confirm
HOURS (only for ICD model)
Press "ENTER" in order to modify the parameter.
Change the value using the alphabetical keyboard
and press "ENTER" to confirm
PROGRAMME
Press "ENTER" to change the characteristic of
one or more program. Appears "50 min 90°C"
which is the first program. Pressing the buttons
"UP" and "DOWN" is possible to defoliate the
parameters, when appears the program you
would like to modify press "ENTER" in order to
enter in a menu of parameters of the chosen
program.
NAME
Press "ENTER" in order to enter in the parameter.
Insert the name chosen using the alphabetical
keyboard. Use the bottom "SINGLE CYCLE" to
delete any mistakes and press "ENTER" to
confirm and go on to the next step.
AUTO (only for machine equipped with the
humidity sensor)
Press
"ENTER"
in
parameter. Press "ENTER" and "DOWN" to
change it. When the parameter is "NO", the
program has a specific duration and temperature
of drying. When the parameter is "YES", the
program is automatic and has a temperature and
a residual level of humidity to reach. Press
"ENTER" and "DOWN" to select one of the curve
in the memory more suitable for the linen to dry.
Press "ENTER" to confirm and go on to the next
step.
CYCLE DURATION
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
duration of the heating cycle (value between 1
and 99 minutes), and press "ENTER".
ROTATION TIME (only for machine equipped with
inverter)
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
duration
of
the
anticlockwise (value between 10 and 40 seconds),
and press "ENTER for confirmation.
REVERSING PAUSE (only for machine equipped
with the reversing drum)
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
duration of the pause (value between 5 and 15
seconds), and press "ENTER for confirmation.
TEMPERATURE CYCLES
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
temperature (value between 25 and 90° C), and
press "ENTER for confirmation.
COOLING DURATION
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
duration of the cooling cycle (value between 0 and
15 minutes), and press "ENTER for confirmation.
order
to
visualize
rotation
clockwise
END COOLING TEMPERATURE
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
end cooling temperature (value between 20 and
35° C), and press "ENTER for confirmation.
END CYCLE HUMIDITY (only for machine
equipped with the humidity feeler)
Press "ENTER" in order to visualize the parameter
value. Use the alphabetical keyboard to insert the
value of humidity (value between 50 and 10%),
and press "ENTER for confirmation.
COST OF THE PROGRAM (only for coin op
machines)
Press "ENTER" to visualize the parameter value.
Use the alphameric keyboard to insert the amount
of money to be payed for the chosen time defined
by the parameter "minimum time". The cost of the
program is displayed in the actual currency, with a
decimal figure (if necessary). The value is
between 0 and 64000. Press "ENTER" to confirm.
MINIMUM TIME (only for coin op machines)
Press "ENTER" to visualize the value of the
parameter. Use the alfameric keyboard to select
the
the time you want to buy, by paying the amount
selected from the previous parameter "cost of the
program".
The value is between 1 and 255. Press "ENTER"
to confirm.
BUZZER DURATION
Press
"ENTER"
parameter. Use the alphameric keyboard to insert
the time of activation of the buffer at the end the
program (value between 1 and 15 seconds), and
press "ENTER" for confirmation.
12.
PROGRAMMING
MACHINES
Coin
box
modifying times, temperature and prices of the
singles programs. It is necessary to have a
keyboard of 16 buttons.
and
Remove electric feeding on the machine: open the
anterior door with a screwdriver. Disconnect the
flats of 5 buttons keyboard (as in the picture) from
the electronic plate and connect the 16 buttons
ones (it is included with the documents of the
machine)
13
to
visualize
the
FOR
machines
can
be
26/11/04
value
of
COIN
BOX
programmed,
Advertisement
