Panasonic CZ-RTC6BLW Operating Instructions Manual page 11

3
Make the settings for network connection.
1. After confirming that the Wireless LAN
functionality on the remote controller is set to
[Enable] (P.9), tap "Next".
„Remote controller
Follow the instructions on the app screen.
„Mobile device
Tap "Next".
2. Select the option that matches the status
displayed on the remote controller screen.
„Remote controller
Follow the instructions on the app screen.
„Mobile device
Tap to select the option.
3. Select the preferred router support connectivity
mode.
„Mobile device
Tap to select the option.
Refer to your router's operating instructions and proceed as follows.
„ If the router supports the WPS mode, go to Step 4.
„ If the router does not support the WPS mode, or if you do not know whether it supports
the mode, go to Step 5.
4
Connect to the network using WPS mode.
1. Press the WPS button on the router to establish
connection.
2.
Tap "Next" after the router is ready for
connection.
„Mobile device
Tap "Next".
11