Important Precautions; Before Using; About Pjlink - Toshiba TDP-TW350U Quick Manual

2

IMPORTANT PRECAUTIONS

You should read this first before you use this software.
Notice Regarding Software and Instruction Manual
(1) Copying or duplication of this software and Instruction Manual (this manual) in whole or
in part is not allowed.
(2) Use of this software and Instruction Manual (this manual) is allowed only on one
personal computer.
(3) Toshiba Corporation is not liable whatsoever for any damages to the user or a third
party as a result of use of a device by this software and Instruction Manual (this
manual).
(4) Every effort has been made in assuring the quality during production of the CD-ROM
contained in this package. If for any reason the CD-ROM has been damaged during
production and within the warranty, the disk will be replaced free of charge. For all other
nonconformities or damages made other than during the production of the CD-ROM,
Toshiba Corporation will not be held liable whatsoever.
The contents of this software and Instruction Manual (this manual) are subject to
change without notice.
(5) Do not play back the CD-ROM packaged with this Software Application on a musical
CD player or a similar device. Doing so may damage the headphones or speakers, or
injure your ears.
(6) Toshiba Corporation is not liable whatsoever for any compensation arising from errors
in descriptions in this Instruction Manual.
(7) The personal computer screens shown in this Instruction Manual are examples, and
may differ from actual screens.
● Microsoft and Windows are registered trademarks of the Microsoft Corporation of the
U.S. registered in the USA and other countries.
● Pentium is a trademark or registered trademark of Intel Corporation in the USA.
CONTENTS

BEFORE USING .............................................................................................. 3

About PJLink ............................................................................................................ 3

INSTALLING SOFTWARE APPLICATION ..................................................... 4
Minimum System Requirements .............................................................................. 4
Main Features of This Software Application ............................................................. 4
Installation ................................................................................................................ 4
Uninstallation ............................................................................................................ 4
Updates .................................................................................................................... 4
PROJECTOR SETTINGS ................................................................................ 5
Character Entry ........................................................................................................ 6
STARTING THE SOFTWARE APPLICATION ................................................. 7
BEFORE USING
■ About PJLink
Network projectors permit easing of installation site and distance constraints. They offer
much convenience, enabling customers to concurrently control and monitor multiple
projectors.
However, the network projectors may not be effectively utilized in a large scaled system
or the like where manufacturer-specific control systems and commands conventionally
allow a projector to be controlled only by the software application provided by the same
manufacturer who made the projector. Some users may even have to develop a complex
control software application on their own.
To remove such barriers between manufacturers and to promote standardization of
controlling protocols for network projectors, JBMIA has launched the PJLink Class 1.
Network projectors of different models or provided by different manufacturers can be
controlled and monitored using the same software application, assuming they are
PJLink – compliant.
This projector and software application package "Projector Management Utility" are fully
compliant to the specifications of JBMIA PJLink Class 1. They support all the commands
defined by PJLink Class 1, and the compliance has been verified with the PJLink
standard specifications Version 1.0.
With PJLink, multiple projectors (100 units maximum) used in classrooms, meeting
rooms, etc., can be controlled and their operating state can be monitored via network
connections.
3