2003 New Model Update
VCU / VIU Remove
Set the Parking Brake Turn the ignition switch to
the on position.
Place the shifter in the neutral position.
Turn the ignition switch off and disconnect the
battery. Apply gentle up pressure to the corner
of the shifter trim plate.
Continue applying pressure around the shifter
trim plate until it can be removed.
Remove the two screws that secure the coin tray.
The forward end of the tray has a point that is set
into a notch under the ash tray.
Remove the two screws in the area indicated by
the two fingers. A third screw is under the tray
near the back.
98
Apply gentle up pressure to the radio /HVAC
bezel. Apply pressure around the bezel until it
can be removed.
Pull the bottom of the bezel outward and then
slightly down to remove the top of the bezel.
99
29
(912)
Legacy
100
101
June 2002