Subaru Forester 2.5X 2003 Technicians Reference Booklet page 30

2003 New Model Update
Disconnect the electrical connectors from the
back of the radio / HVAC bezel.
Remove the indicated screw to allow the dash
bezel to move upward when the radio is being
removed.
Remove the two screws located under the
OnStar buttons.
Remove the two screws from the driver side of
the radio.
102
Remove the two screws from the Passenger side
of the radio.
Complete radio / HVAC removal is then required.
Remove the aspirator from the connector above
the accelerator pedal.
103
The aspirator tube is routed between this bracket
and harness.
Protect the radio and shifter from scratches
during removal and installation.
Carefully disconnect all the connectors from the
back of the radio.
104
30
(912) Legacy
105
106
June 2002