The Default Setting Menu - Toshiba TDP-EW25U Owner's Manual

Using the menus 1 (Continued)
<Logo registration>
How to register user logo
1 Project a picture to register.
2 Select [User logo] in the Display setting menu, and press the
button.
3 Select <Logo registration> from the displayed menu list and press
the button. button.
4 The registration area is displayed for confirmation. Select [OK]
and press the button. button.
• If the registered picture does not fall within the display area, operate the
computer to scroll the screen.
5 Registration starts.
To stop the registration, press the RETURN button.
•
Notes
• You can register a logo when the input is set to Computer, Network and USB
memory.
• For the Network-input, a logo can be registered only when the image is displayed.
• For the USB memory-input, a logo cannot be registered when a thumbnail list is
displayed.
• If you register a logo after keystone distortion or digital zoom has been adjusted,
those adjustments will be reset to their factory settings. However, when the logo
registration is complete, they will return to the adjustments that you made.
• The area that can be registered is 640 × 400 dots at the center of the screen. To
register a company logo, prepare the image within the limit.
• Only one logo can be registered. When a new image is registered, the old one is
erased.
• The time needed to register or display the image varies depending on the data size.
• If you use this function on commercial video software, broadcast or cable-
broadcasting except for the purpose of your private viewing and listening, it may
infringe the copyright protected by the copyright laws.
<Display style>
Select the size of the registered logo.
: Displays the registered image in original size at center of the screen.
: Displays the registered image by enlarging fully in the screen.
(As processed digitally, the image quality is degraded.)
<Logo confirmation>
You can preview the registered logo.
<Reset logo>
You can reset the registered logo and display style to the factory setting. (The logo
set for the start-up screen and background is reset.)
4�

The Default setting menu

■
This menu shows placement status and other settings.
Default setting 1 menu
or or
Item
Keystone Screen shrinking at bottom
Auto keystone Always correct keystone distortion automatically.
Blackboard
When projecting on a non-screen surface, select a color in accordance with
mode the projecting surface.
Press
No signal
Set the time to wait for the power to be turned off after the last operation is
power off
made with no input signal.
Auto input
Set whether the input with signals is only selected or not.
search
Beep Beep when operation is made.
Power on Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the main power switch is turned on (Auto).
Detailed description
[Blackboard mode]
Projects the image in colors more like projecting on a screen.
Precaution
• The projected image may differ depending on the type, color, and material of the
blackboard and wall even if the selected color is the same as the projected screen.
[Auto input search]
[On]: Automatically searches the signals that can
be projected, and switches input from the
connected device that outputs the video
signals each time the INPUT button is
pressed. The input from the connected device
that outputs no video signals is skipped.
[Off]: Displays the Input select menu.
Toggle with
(The input without signals can be selected.)
[Power on]
Note that if [Power on] is set to [Auto], then if the power is supplied when restored
after a power outage, the projector will come on.
Description
Screen shrinking at top
and switch with and . Off/Green/Black/Brown/Blue/Beige
On (not turned off)
Input select menu
Input select
Computer 1
Y/P
B
Computer 2
Y/P
B
Video
S-video
buttons and press button.
Network
USB memory
/ shows whether signal is
input or not.
43
On Off
30 min.
On Off
On Off
Manual Auto
/P 1
R
/P 2
R