Advertisement
REGISTRATION & SAT-FI2 APP SETUP
REGISTERING AT MY ACCOUNT
The customer will receive a Welcome to Globalstar email from
message-noreply@globalstar.com. Open the email and click
Follow all on-screen instructions to register the account.
SAT-FI2 APP SETUP
On a smart device, download the Sat-Fi2 App from either the Apple App Store or
Google Play Store using an LTE or standard Wi-Fi connection.
A WELCOME screen will be displayed. Select LET'S GET STARTED.
Select the following option:
•
QUICK START – Allows users to immediately use Voice, Text, and Browse
without any further configuration
•
ADVANCED SETUP – Allows the users to create local account name and
provides a wizard to help configure Email
Follow all on-screen instructions.
SAT-FI2 WI-FI NAME & PASSWORD
Default Wi-Fi Name:
Default Wi-Fi Password:
ESTABLISHING A SATELLITE CONNECTION
BOOT-UP SEQUENCE
The Sat-Fi2 RAS boot-up sequence (powering on Sat-Fi2 RAS, booting up, and being able
to make a call) can take on average 5 minutes.
Power on the Sat-Fi2 RAS by pressing the Power Button.
The Sat-Fi2 RAS processor/operating system will start (All LEDs will blink
forward/reverse direction).
The satellite modem will start to boot up. When boot up is complete, the Power
green
LED will be
The Sat-Fi2 Wi-Fi will then boot up and the user can now connect to the Sat-Fi2
Wi-Fi network.
The Sat-Fi2 RAS will connect to a satellite/gateway (Power LED will be
the Satellite LED will be blinking green).
satfi2_<xxxxxx>
(where xxxxxx is the last 6 digits of the ICCID)
satfi1234
and the Satellite LED will be blinking red.
.
Register Now
green
in
green
and
Advertisement
